I’ve posted this DIY once, but it was in Portuguese. Many people asked me to post the English translation, so here it go! Happy DIY!
19 x 2-litre PET soda bottles; 1 broomstick; scissors; retractable knife; hole puncher; wire; hammer and nail
1st – Remove the label from the bottles;
2nd – Remove the bottom of the bottles using the knife;
3rd – Cut parallel lines (0,5cm) up to the top edge;
4th – Remove the neck of the bottles with the scissors;
5th – Make 17 bottles without the neck and one with it;
6th – Fit the 17 bottles one by one through the neck of the bottle with the neck;
7th – Cut the top part of another bottle and fit it on the top of the broom you just made;
8th – Make two holes and pass the wire through all the bottles;
9th – Fasten the ends of the wire on one side;
10th – Tie the base of the broom to the broomstick using two nails and your broom is ready!